Academic Technologies (AT) at The University of Texas at El Paso (UTEP), in partnership with the Texas Holocaust and Genocide Commission, created digitized m...
- Author:
- Academic Technologies (AT) at The University of Texas at El Paso (UTEP)
Updating search results...
962 Results
جامعة الملك خالد - عمادة التعلم الإلكتروني
المقررات المفتوحة
حاسب الي للمهندسين - 221 هعم Computer for Engineers
Introduction to MATLAB and its Interface
This Lecture Contains
• Interactive Commands
The video highlights the security issues when data is saved on cloud storage and emphasizes on protecting of personal data
- Author:
- Luqman Gassama
***LOGIN REQUIRED*** This lesson will introduce students to the topic of designing websites that take web accessibility issues into account and will introduce students to Section 508 Of The Rehabilitation Act.
***LOGIN REQUIRED*** This lesson will introduce students to the web site design practice of using Wireframing to develope webpages within a website.
- Author:
- Michael Magboo
Students explore the basics of DC circuits, analyzing the light from light bulbs when connected in series and parallel circuits. Ohm's law and the equation for power dissipated by a circuit are the two primary equations used to explore circuits connected in series and parallel. Students measure and see the effect of power dissipation from the light bulbs. Kirchhoff's voltage law is used to show how two resistor elements add in series, while Kirchhoff's current law is used to explain how two resistor elements add when in parallel. Students also learn how electrical engineers apply this knowledge to solve problems. Power dissipation is particularly important with the introduction of LED bulbs and claims of energy efficiency, and understanding how power dissipation is calculated helps when evaluating these types of claims. This activity is designed to introduce students to the concepts needed to understand how circuits can be reduced algebraically.
- Author:
- Erik Wemlinger
- CREAM GK-12 Program, Engineering Education Research Center, College of Engineering and Architecture,
Conditional Remix & Share Permitted
CC BY-NC-SA
Introductory subject suitable for students with little or no previous background in electronics. Elementary network theory with op-amps, transients, second order linear systems and active filters, AM and FM modulation, diode and transistor circuits, design of digital circuits. Examples emphasize practical uses of electronics in experimental science. Alternate week laboratory.
- Subject:
- Applied Science
- Career and Technical Education
- Computer Science
- Electronic Technology
- Material Type:
- Full Course
- Textbook
- Author:
- Cory, David G.
- Date Added:
- 01/01/2002
Traditionally, progress in electronics has been driven by miniaturization. But as electronic devices approach the molecular scale, classical models for device behavior must be abandoned. To prepare for the next generation of electronic devices, this class teaches the theory of current, voltage and resistance from atoms up. To describe electrons at the nanoscale, we will begin with an introduction to the principles of quantum mechanics, including quantization, the wave-particle duality, wavefunctions and Schrĺ_dinger's equation. Then we will consider the electronic properties of molecules, carbon nanotubes and crystals, including energy band formation and the origin of metals, insulators and semiconductors. Electron conduction will be taught beginning with ballistic transport and concluding with a derivation of Ohm's law. We will then compare ballistic to bulk MOSFETs. The class will conclude with a discussion of possible fundamental limits to computation.
- Author:
- Baldo, Marc
This unit examines the use of polymers and demonstrates how the properties of polymers are controlled by their molecular structure. You will learn how this structure determines which polymer to use for a particular product. You will also explore the manufacturing techniques used and the how the use of polymerisation can be used to control the structure of polymers.
This set of 10 lectures (about 11+ hours in duration) was excerpted from a three-day course developed at MIT Lincoln Laboratory to provide an understanding of radar systems concepts and technologies to military officers and DoD civilians involved in radar systems development, acquisition, and related fields. That three-day program consists of a mixture of lectures, demonstrations, laboratory sessions, and tours.
- Author:
- O'Donnell, Robert M.
***LOGIN REQUIRED*** In this lesson students will learn about the basic soils components, importance of soils,main ideas in land evaluation including: texture, depth, slope and erosion and career possibilities.
- Author:
- Jessica Fernandes
Conditional Remix & Share Permitted
CC BY-NC-SA
Lectures and labs on digital logic, flipflops, PALs, counters, timing, synchronization, finite-state machines, and microprogrammed systems prepare students for the design and implementation of a final project of their choice: games, music, digital filters, graphics, etc. Extensive use of VHDL for describing and implementing digital logic designs. Possible use of lab report for Phase II of the Writing Requirement. Six extra units possible via registration for 6.905 after project proposal.
- Subject:
- Applied Science
- Career and Technical Education
- Electronic Technology
- Engineering
- Material Type:
- Full Course
- Textbook
- Author:
- Chandrakasan, Anantha
- Date Added:
- 01/01/2006
welcome to programming! If you've never learned to program before, you might be wondering what programming actually is. Well, when we write a program, we're giving the computer a series of commands that kind of look like a weird form of English. You can think of a computer as a very obedient dog, listening to your every command, and doing whatever you tell it to do. So what's so cool about programming? Well, it really depends on what you think is cool. Because as it turns out, you can use programming for almost everything. Programs control robots that can take care of patients, and my favorite, robots that can roam around Mars and look for water on the surface. Programs help self-driving cars know which way to turn-- which is pretty important! Programs help doctors cure diseases by processing huge amounts of medical data. Programs can be really fun games, like Doodle Jump, Angry Birds, Minecraft. Programs make it possible for Pixar to put out their awesome 3-D animated movies, and for movies like Harry Potter to have such cool special effects. What's your favorite movie? I bet that a computer helped make it somehow. Programs are behind the websites and the apps that you use every day, all the time, like Google Maps, and Wikipedia, and YouTube, and of course, where you are now, Khan Academy. Here, on Khan Academy, you'll learn how to write JavaScript programs to make drawings, animations, and games. And that will be a great start towards creating whatever you're imagining in your head.
The Internet of Things (IoT) digitizes physical assets -- sensors, devices, machines, gateways and the network. It connects people to things and things to things in real-time.
The challenges faced by IoT along with the opportunities available are discussed.
- Author:
- Vitria Tech.
***LOGIN REQUIRED*** This is lesson 4 of 4. Students will be presenting and evaluating their apps for cell phones that will provide farmers with the opportunity to learn how different irrigation methods work depending on soil type.
- Author:
- Felicia Rush
To better understand electricity, students investigate the properties of materials based on their ability to dispel static electricity. They complete a lab worksheet, collect experimental data, and draw conclusions based on their observations and understanding of electricity. The activity provides hands-on learning experience to safely explore the concept of static electricity, learning what static electricity is and which materials best hold static charge. Students learn to identify materials that hold static charge as insulators and materials that dispel charge as conductors. The class applies the results from their material tests to real-world engineering by identifying the best of the given materials for moving current in a solar panel.
- Author:
- RESOURCE GK-12 Program, College of Engineering, University of California Davis,
- Lauren Jabusch, Cristian Heredia, Andrew Palermo
***LOGIN REQUIRED*** This lesson is part 2 of 4. After learning about the food safety continuum students will learn protocols that assist the farmer/rancher to do their part to ensure a safe and healthy food supply. This lesson covers what farm biosecurity is and the practices that make a farm safe from biological hazards.
- Author:
- Heather Thomas
Examine the principles of geometric design that are the basis for the beautiful and intricate patterns in the art of the Islamic world. Includes a brief overview of Islamic art, an introduction to related works in the Museum, and a series of pattern-making activities (including reproducible grids) for use in the classroom. Teachers can readily adapt these materials to create exciting lessons in art, culture, math, and geometry.
This resource for educators is made possible by the Mary and James G. Wallach Foundation.
- Author:
- THE METROPOLITAN MUSEUM OF ART
This appendix summarizes the most commonly used Java language features and APIs in the textbook.
- Author:
- Robert Sedgewick
- Kevin Wayne